Need help?Do you have a question about the Integra DTR-50.2 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Input Sensitivity/Impedance | 200 mV / 47 kΩ |
| HDMI Version | 2.0 |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| USB Port | 1 |
| Power Output (8 ohms) | 90 W |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Video Formats Supported | 4K, 3D |
| Signal-to-Noise Ratio | 106dB |
| Video Inputs/Outputs | Composite, Component |
| Audio Inputs/Outputs | Digital Audio (Optical): 2 in, Digital Audio (Coaxial): 2 in |
Safety guidelines for operating the apparatus safely and preventing damage.
Warnings about electrical shock, liquid entry, and object insertion risks.
Guidelines for proper installation, ventilation, and environmental considerations.
Information regarding recording copyrighted material legality.
Instructions for cleaning and maintaining the unit's finish and lettering.
Safety advice on power, hearing protection, handling wet units, and general care.
FCC compliance for US models and Canadian ICES-003 compliance.
List of accessories included with the AV receiver for setup and operation.
Instructions for installing batteries and aiming the remote controller.
Technical details of the AV receiver's amplifier section, including power output.
Overview of audio and video processing technologies and formats supported.
List of available input and output terminals for connecting various components.
Additional features like DSP modes, network capability, and calibration tools.
Identification and explanation of controls and indicators on the front panel.
Identification and explanation of input/output terminals on the rear panel.
Explanation of various indicators shown on the AV receiver's display.
Instructions for operating the AV receiver using the remote control.
How to use the remote to control the built-in AM/FM tuner.
Recommended placement for front, center, surround, and other speakers for optimal surround sound.
Table showing speaker channel usage based on the number of speakers.
Guide for attaching color-coded labels to speaker cables for correct connection.
Important safety and connection guidelines to prevent damage and ensure proper wiring.
Instructions for preparing and connecting speaker cables to screw terminals.
Guidelines for using banana plugs with speaker terminals.
Guidance on positioning dipole speakers for surround and surround back channels.
How to connect powered subwoofers to the AV receiver's pre-out jacks.
Instructions for bi-amping front speakers for improved audio performance.
Diagram illustrating how to connect speakers and subwoofers to an external power amplifier.
Overview of available video connection formats like HDMI, Component, S-Video, and Composite.
Explanation of digital and analog audio connection formats.
How to assign video sources to HDMI inputs and configure outputs.
Explanation of ARC function for sending TV audio back to the AV receiver.
How to assign component video sources to input selectors.
How to assign digital audio sources (optical/coaxial) to input selectors.
Important notes and requirements for establishing RI connections.
Explanation of system control features like System On/Auto Power On and Direct Change.
Instructions for connecting the supplied FM and AM antennas for radio reception.
Steps for safely connecting the AV receiver to an AC power outlet.
Comparison of video connection formats for optimal picture quality.
How to configure monitor output for HDMI or analog signals, including upconversion.
Specific configuration for analog monitor output and video signal flow.
Explanation of audio connection options like analog, optical, coaxial, and HDMI.
Procedures for powering the AV receiver on using the front panel or remote.
Procedures for putting the AV receiver into standby mode.
How to select the language for the onscreen setup menus.
Steps to select an input source and play audio/video from connected components.
How to view details about the current input source and signal format.
Adjusting the brightness level of the AV receiver's front panel display.
How to temporarily mute the audio output of the AV receiver.
Setting the AV receiver to turn off automatically after a specified time.
Prioritizing sound output for specific speaker configurations like front high or surround back.
Quick access to frequently used settings via the Home menu.
Customizing the names displayed for input selectors for easier identification.
Connecting and using stereo headphones with the AV receiver.
Programming single-button macros to execute multiple remote control operations.
Procedure for turning off all connected components using the All Off function.
Changing the default playback components assigned to Activities macros.
Initial setup process for Audyssey MultEQ room correction and speaker configuration.
Guidelines for positioning the setup microphone at listening positions.
Adjusting the powered subwoofer volume to 75dB during setup.
Steps for initiating the automatic room correction and speaker setup process.
Option to save the calculated speaker configuration and exit the setup.
Explanations for common error messages during setup and how to resolve them.
How to manually change speaker settings after automatic setup, if needed.
Troubleshooting tips for subwoofer detection issues during Audyssey setup.
Procedures for tuning into AM and FM radio stations.
Using the auto tuning function to find stations automatically.
Manually tuning to specific frequencies for AM and FM stations.
Directly entering a radio station's frequency to tune in.
Storing favorite radio stations as presets for quick selection.
How to select stored presets and remove them.
Instructions for connecting and listening to SIRIUS Satellite Radio.
Steps for connecting the SiriusConnect tuner receiver, antenna, and power adapter.
Guidance on positioning the antenna for optimal satellite signal reception.
Configuring the AV receiver to recognize the SIRIUS Satellite Radio tuner.
Selecting channels by scanning through all available options.
Selecting channels by browsing through predefined categories.
Entering a specific channel number to tune directly to a station.
Information on how to subscribe to SIRIUS Satellite Radio service.
Enabling and configuring the parental lock feature to restrict channel access.
Procedure for changing the 4-digit PIN used for parental lock access.
How to cycle through and view information like channel name, artist, and song title.
Using the signal strength meter to guide antenna positioning.
Explanations for common messages displayed during SIRIUS Satellite Radio operation.
Explanation of the Radio Data System and its capabilities.
How to view text information broadcast by RDS-enabled radio stations.
Searching for radio stations based on program type categories.
Locating and listening to radio stations that broadcast traffic information.
How to connect external recording devices like VCRs or CDRs.
Recording audio and video from different sources simultaneously.
Steps for selecting sources and starting the recording process.
Introduction to the dedicated buttons for selecting different listening modes.
How to choose appropriate listening modes for movies, music, games, and THX content.
Information on audio formats supported by various listening modes.
Visual guide showing speaker activation for different channel configurations.
Descriptions of basic listening modes for audio playback.
Explanation of Dolby Pro Logic IIx modes for 2-channel sources.
How Dolby Pro Logic IIz Height enhances spatial experience with height channels.
Modes for expanding 5.1-channel sources for 6.1/7.1 playback.
How Dolby Digital, Digital Plus, and TrueHD signals are processed.
Details on DTS-HD High Resolution Audio and Master Audio listening modes.
How DTS Neo:6 expands 2-channel sources for 7.1 playback.
Explanation of Audyssey DSX system for enhanced surround impression.
Optimized modes for movie, music, and game audio playback.
THX Select2 modes for expanding 5.1-channel sources.
Mode for expanding 5.1-channel sources for 6.1/7.1 playback, especially with Dolby Digital EX.
DSP modes for classical, acoustic, and rock/pop music.
DSP modes for TV shows and video games.
DSP modes for background music and virtual surround sound.
How to access and navigate the AV receiver's setup menus via the TV screen.
General steps for selecting and changing settings within the setup menus.
Selecting how video sources are output via HDMI or component outputs.
Indicating whether a subwoofer is connected for system configuration.
Specifying the output resolution for HDMI and component outputs, including upconversion.
Assigning connected HDMI devices to specific input selectors.
Assigning component video sources to input selectors.
Assigning digital audio sources (optical/coaxial) to input selectors.
Adjusting subwoofer sensitivity to match DVD player output levels.
Introduction to speaker settings, some of which are automatic from Audyssey.
Setting speaker impedance and front speaker type (Normal/Bi-Amp).
Specifying connected speakers and setting crossover frequencies.
Setting the distance from each speaker to the listening position for accurate sound arrival.
Adjusting individual speaker volume levels for uniform sound at the listening position.
Adjusting tone of individual speakers using a 15-band equalizer.
Using Audyssey's automatic EQ settings or disabling it.
Configuring THX-specific settings like surround back speaker spacing and loudness plus.
Option to disable Audyssey features in THX listening modes.
Selecting audio channels for multiplex sources or mono playback.
Adjusting panorama and dimension for Dolby PLIIx Music mode.
Adjusting gain for front high speakers in Dolby Pro Logic IIz modes.
Configuring how Dolby EX encoded signals are processed.
Adjusting center image for DTS Neo:6 Music surround.
Adjusting the soundstage width when using Audyssey DSX.
Optimizing the Theater-Dimensional mode based on listening angle.
Setting the Low-Frequency Effects channel level for various audio formats.
Enhancing sound quality at low volumes by adjusting frequency response and surround levels.
Maintaining a consistent playback volume level across different programs and commercials.
Individually adjusting input levels for source components.
Correcting audio delay issues for synchronized picture and sound.
Customizing the names displayed for input selectors for easier identification.
Adjusting picture quality and reducing noise on the screen.
Optimizing picture settings for video game consoles to reduce input lag.
Selecting the aspect ratio for video sources displayed on the TV.
Selecting preset picture modes (Custom, ISF Day/Night, Cinema, Game).
Automatically or manually adjusting settings for film content playback.
Adjusting picture sharpness and reducing video noise.
Specifying video output resolution and conversion for HDMI and component outputs.
Basic picture adjustments for brightness, contrast, color balance, and saturation.
Fine-tuning color balance and gamma for picture output.
Assigning default listening modes to specific input sources and signal formats.
Specifying default listening modes for DTS and multichannel PCM sources.
Configuring volume display, muting level, maximum volume, and power-on volume.
Adjusting onscreen display options and TV system format (NTSC/PAL).
Configuring 12V trigger outputs for automatic component power control.
Setting a unique remote ID to avoid interference with other components.
Setting up and managing audio playback in multiple zones.
Specifying FM/AM frequency steps based on regional standards.
Configuring settings for SIRIUS Satellite Radio reception.
Managing HDMI audio output and lip sync correction.
Enabling system control and power linking for HDMI-CEC compatible devices.
Configuring ARC function and TV control via HDMI.
Setting auto power off and configuring network connection parameters.
Instructions for updating the AV receiver's firmware via network or USB.
Locking setup menus to prevent unintended changes.
Adjusting bass and treble tone controls for the front speakers.
Utilizing Audyssey's features for dynamic EQ and volume leveling.
Reducing dynamic range for quiet listening at low volumes.
Enhancing sound quality of compressed music files.
Compensating for harsh high-frequency content in soundtracks.
Setting audio output priorities when digital and analog inputs are present.
Manually setting digital signal format (PCM/DTS) if auto-detection fails.
Introduction to network-ready features and technologies.
Necessary network configuration and hardware for connecting to the AV receiver.
Step-by-step guide for connecting the AV receiver to a home network via Ethernet.
Prerequisites for receiving Internet radio, including network access.
Information on accessing and using the vTuner Internet Radio service.
Steps to listen to internet radio stations beyond vTuner.
Adding favorite internet radio stations to presets.
How to play music files stored on a computer or media server.
Using functions for randomizing song order and repeating tracks or folders.
Configuring Windows Media Player 11 for music file sharing with the AV receiver.
Details on file formats (MP3, WMA, WAV, FLAC, etc.) supported for server playback.
System requirements for playing music files from computers or media servers.
Explanation of the Digital Living Network Alliance concept.
Configuring Windows Media Player 12 for music streaming.
Playing music files from a DLNA device using the AV receiver's remote.
Manually configuring network settings if DHCP is disabled.
Configuring DHCP server status and static IP addresses.
Specifying network parameters like subnet mask, gateway, and DNS server.
Configuring proxy server settings and enabling/disabling network control.
Specifications and compatibility requirements for USB storage devices.
Steps for selecting and playing music files stored on a USB device.
Using playback functions to randomize song order or repeat tracks.
Important considerations for connecting USB devices, including power and compatibility.
Setup for 5.1 main room and 2-channel Zone 2 stereo playback.
Setup for 7.1 main room and 2-channel Zone 2 stereo playback via an external amplifier.
Using composite or component video outputs for Zone 2 TV connection.
Setup for 7.1 main room and 2-channel Zone 3 stereo playback via an external amplifier.
Activating or deactivating Powered Zone 2 functionality.
Configuring Zone 2/3 output settings and maximum volume levels.
Setting Zone 2/3 output to fixed or variable and managing volume limits.
Specifying the volume level for Zone 2/3 when the AV receiver is turned on.
Enabling or disabling component video output for Zone 2.
Procedures for turning zones on/off, selecting sources, and adjusting volume.
Using the remote controller to select zones and turn them on/off.
Controlling the volume for Zone 2 and Zone 3 using the receiver or remote.
Temporarily muting the audio output for specific zones.
Fine-tuning bass, treble, and balance for Zone 2 audio.
Connecting 12V trigger outputs to automatically power components.
Configuring trigger signals for main room, zones, and delays.
Using IR receivers in zones to control the AV receiver remotely.
Using IR receivers for cabinets where line-of-sight is blocked.
Using IR emitters to control other components from the AV receiver.
Connecting iPod/iPhone models to the AV receiver's USB port.
Steps to select and play music files from an iPod/iPhone.
Using the onscreen display for navigating iPod content.
Information on connecting UP-A1 and RI Docks for iPod integration.
Details on using the UP-A1 Dock for playing iPod music, photos, and movies.
Information on using the RI Dock for iPod playback, slideshows, and TV viewing.
How iPod operations affect AV receiver power and input selection.
Using the AV receiver's remote controller to operate basic iPod functions.
Table indicating which remote buttons are available for controlling different component types.
List of components with preprogrammed remote control codes for direct operation.
How to find appropriate remote control codes using the on-screen menu.
Steps to search for remote control codes by component brand name.
Steps to search for remote control codes by component model number.
Procedure for entering 5-digit remote control codes for components.
Specific remote control codes for Integra/Onkyo components connected via RI.
How to control compatible TVs using the AV receiver's remote.
How to control compatible players and recorders.
Restoring learned commands on remote mode buttons to their defaults.
Restoring the entire remote controller to its factory default settings.
Table indicating which remote buttons are available for controlling different component types.
Specifying actions for Easy Macro commands in Activities.
Setting actions like power on, source selection, and playback for Activities.
Teaching the remote controller to learn commands from other remote controls.
Removing learned commands from specific remote modes.
Executing programmed macros and deleting them.
Programming custom macros for Activities, overriding Easy Macro defaults.
General advice on resolving issues and contacting support.
Solutions for problems related to the AV receiver not turning on or standby indicator flashing.
Troubleshooting steps for when there is no sound or the audio is very quiet.
Resolving problems with audio return channel, front speakers only, or center speaker sound.
Addressing issues where surround, front high, or subwoofer speakers produce no sound.
Diagnosing no sound issues related to specific audio formats like PCM, DTS, or HDMI input.
Solutions for no picture, distorted picture, or on-screen menu display problems.
Troubleshooting missing or incorrect on-screen menu displays.
Improving noisy FM stereo reception or no reception.
Resolving problems with the remote controller not working or controlling other components.
Troubleshooting issues with controlling other manufacturers' components.
Resolving problems with learning commands or recording audio/video.
Troubleshooting no sound from Zone 2 speakers or issues with Powered Zone 2.
Resolving problems accessing music servers or internet radio.
Troubleshooting issues with playing music files from USB devices.
Information on power consumption during standby mode.
Resolving issues with headphone sound or speaker distance settings.
Troubleshooting problems with RI functions not working correctly.
Resolving the 'Ambient noise is too high' error during Audyssey setup.
Notes on HDMI video processing, upconversion, and potential picture quality issues.
Detailed specifications for the AV receiver's amplifier, including power and distortion.
Technical details for the AM/FM and SIRIUS digital tuners.
General specifications including power supply, consumption, dimensions, and weight.
Technical details related to the AV receiver's HDMI interface and supported features.
Specifications for video input and output terminals.
Details on analog and digital audio outputs, including pre-outs and headphone jack.
Specifications for other terminals like SETUP MIC, Ethernet, USB, and RI.
Explanation of HDMI as a digital interface standard for AV components.
List of audio formats supported over HDMI, including PCM and bitstream.
Explanation of HDCP copy protection for digital video signals.
Identifying components compatible with Remote Interactive over HDMI (RIHD).
How RIHD enables system control between the AV receiver and compatible TVs.
How RIHD enables system control between the AV receiver and compatible players/recorders.
Steps for physically connecting and configuring RIHD-compatible devices.
Verifying RIHD functionality by testing power control and audio output.
Chart showing video signal output capabilities based on input and output types and resolutions.
To Next Page
