Need help?Do you have a question about the Integra DTR-80.1 and is the answer not in the manual?
General| Dolby Digital Decoding | Yes |
|---|---|
| DTS Decoding | Yes |
| Audyssey | Audyssey MultEQ XT |
| Internet Radio | Yes |
| Bluetooth | No |
| Ethernet | Yes |
| Frequency Response | 5 Hz–100 kHz (+1 dB, -3 dB) |
| HDMI Outputs | 2 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Network Connectivity | Ethernet |
| THX Certified | No |
| Networking | Ethernet |
| Input Sensitivity/Impedance | 200mV/47kΩ |
| Video Inputs/Outputs | Component |
| Audio Inputs/Outputs | Analog |
| USB Port | Yes |
Key safety instructions for using the apparatus, including warnings against exposure to rain or moisture.
Identification and function of buttons, indicators, and ports on the front panel of the AV receiver.
Details of the input and output terminals located on the rear panel of the AV receiver.
Explanation of how to use the remote controller to operate the AV receiver and its functions.
Guidance on connecting speakers, attaching labels, and configuring speaker settings for optimal playback.
Information on HDMI interface standards, supported audio formats, and system control features.
Step-by-step instructions for connecting components using HDMI cables for video and audio signals.
Procedure for turning the AV receiver on and off, and entering standby mode.
Key initial configuration steps for smooth operation, including TV connection and room correction.
Configuring the 'Monitor Out' setting for display menus and video source output.
Assigning HDMI inputs to input selectors and configuring video source upconversion.
Configuring speaker settings like impedance, type, crossover, and subwoofer usage.
Automated room correction and speaker setup using the MultEQ XT system for optimal acoustics.
Tables detailing available listening modes based on speaker layout and source signal format.
Explanations of various listening modes like Direct, Stereo, Mono, Dolby, DTS, THX, and Neural Surround.
Configuring input/output assignments, including monitor settings and HDMI input configuration.
Setting up component video, digital audio, and analog audio inputs.
Detailed settings for speaker configuration, distance, level calibration, and equalizer adjustments.
Adjusting audio settings such as multiplex/mono, Dolby modes, DTS modes, and soundstage.
Configuring source-specific settings like IntelliVolume and A/V Sync for optimal audio/video synchronization.
Assigning default listening modes to input sources for automatic selection based on signal type.
Configuring hardware-related settings like remote ID, multi-zone, tuner, HDMI, network, and firmware.
Configuring HDMI settings such as audio TV out, lip sync, x.v.Color, and HDMI control (RIHD).
Setting up powered zones, controlling volumes, and configuring zone-specific outputs.
Procedure to find and enter remote control codes for controlling other AV components.
Solutions for problems like not turning on, turning off unexpectedly, or no sound output.
Troubleshooting no sound from specific speakers, signal format issues, and playback limitations.
Resolving issues related to no picture, distorted picture, missing onscreen menus, and noisy reception.
Troubleshooting remote controller not working, inability to control other components, and iPod connection issues.
To Next Page
