Intek KT-370EE - Menu Operation

Menu Operation
English
SCAN : scanning
In the stand-by status, press the FUN (7) key to display scanning indicator, and then press the
CONFIRMATION (5) key to start scanning. If signals exist in one channel/frequency, the
channel/frequency will be displayed. Then press the CONFIRMATION (5) key, the Two-Way Radio will
stop scanning and remain at the current channel/frequency, or else, it will start scanning for the next
channel/frequency after 2 seconds. Press the FUN (7) key to return to stand-by status.
T->R (reverse frequency)
In the channel mode, when dual frequency is used to start reverse frequency function, the receiving frequency
and emission frequency will interchange. In the CHANNEL MODE press the FUN (7) key then press the
UP/DOWN (8) keys. When the LCD display shows T->R ?, press the CONFIRMATION (5) key to confirm.
CT/DCS (CTCSS / DCS selection)
In the stand-by status, press the FUN (7) key to enter menu page, then press the UP/DOWN (10) keys to
confirm (you will see CT/DCS). Press the CONFIRMATION (5) key to enter then press the UP/DOWN (8)
keys to choose CTCSS or DCS. Press the CONFIRMATION (5) key to enter the chosen item. Press the
UP/DOWN (10) keys to set up CTCSS or DCS code. When DCS is chosen, press the LAMP (12) key to
choose forward or reverse direction, and press the CONFIRMATION (5) key to finished set-up.
(Frequency mode only).
FREQ : switch from channel mode to frequency mode
In the stand-by status, press the FUN (7) key and then numeric key 3 to switch to frequency mode. If
the Two-Way Radio is in frequency mode originally, then it switches to channel mode. Press the
function key and then the UP/DOWN (8) keys to find, and when the display shows FREQ ?, press the
CONFIRMATION (5) key to switch.
CHANL : switch from frequency mode to channel mode
In the stand-by status, press the FUN (7) key and then numeric key 3 to switch to channel mode.
Alternatively, press the FUN (7) key to find. When the display shows CHANL ?, press the UP/DOWN
(8) keys to switch. (Confined to frequency mode only)
KEYBO : Keyboard lock setup
In the stand-by status, press the FUN (7) key and then the UP/DOWN (8) keys to find, and when the
display shows KEYBO?, press the CONFIRMATION (5) key to enter. You will see two options available,
AUTO and MANUAL.
AUTO: automatic locking
When this option is chosen, the keyboard will be locked automatically when no operation is performed.
MANUAL: manual locking
When this option is chosen, the keyboard cannot be locked automatically.
After finished setup, press the FUN (7) key to return to previous menu.
Press the FUN (7) key again to return to stand-by status.
- 11 -