Controls and operation
- 6 -
English
F. DW Icon
The DW icon is lighted when the DUAL WATCH function (automatic monitoring of two
channels) is enabled.
G. Alphanumeric Digits
These two alphanumeric digits indicate the country code, in accordance with the
programmed frequency band (i.e. DE, UK, CE, etc.).
H. S/RF Digital Meter
A digital 10-bar S/RF METER indicates the strength of the received signal (from S0 to
S9+30) in the receive mode and the transmitter RF output power (0 to 4W) in the
transmit mode.
I. AM Icon
The AM icon is lighted when radio receives and transmits in AM mode (amplitude
modulation).
L. LOCK Icon
The LOCK icon is lighted when the LOCK function has been enabled.
M. ESP Icon
The ESP icon is lighted when the ESP (Electronic Speech Processor) function has
been enabled. The ESP is an RX & TX electronic modulation processor.
N. EMG Icon
The EMG icon is lighted when one of the special pre-programmed emergency
channels has been selected.
O. SCAN Icon
The SCAN icon is lighted when the SCAN function (automatic search of busy
channels) is enabled.
P. Alphanumeric Digits
These three numeric or alphanumeric digits indicate the operating channel number
(01 to 80, according to the programmed frequency band).
To Next Page
Loading...
