Intel DH67CL - Connecting SATA Drives; Connecting to the Internal Headers

Intel Desktop Board DH67CL Product Guide
16
Graphics Subsystem
The board supports system graphics through either Intel HD Graphics or a PCI
Express 2.0 x16 add-in graphics card.
Integrated Graphics
The board supports integrated graphics through the Intel
®
Flexible Display Interface
(FDI) for processors with Intel HD Graphics.
Intel
®
HD Graphics
The Intel HD Graphics controller features the following:
• 3D Features
⎯ DirectX10.1* and OpenGL* 3.0 compliant
⎯ DirectX11.0* CS4.0 only
⎯ Shader Model 4.0
• Video
⎯ Hi-Definition content at up to 1080p resolution
⎯ Hardware accelerated MPEG-2, VC-1/WMV, and H.264/AVC High-Definition
video formats
⎯ Blu-ray* S3D via HDMI 1.4
⎯ Intel
®
HD Technology with advanced hardware video transcoding
• Dynamic Video Memory Technology (DVMT) 5.0 support including support of up to
1.7 GB Video Memory with a 4 GB and above system memory configuration
High-Definition Multimedia Interface* (HDMI*)
The HDMI port supports standard, enhanced, or high-definition video, plus multi-
channel digital audio on a single cable. It is compatible with all ATSC and DVB HDTV
standards and supports eight full range channels at 24-bit/96-kHz audio of lossless
audio formats such Dolby* TrueHD or DTS* HD Master Audio. The maximum
supported resolution is 1920 x 1200 at 60 Hz refresh (WUXGA). The HDMI port is
compliant with the HDMI 1.3 specification.
The HDMI port is enabled for the POST whenever a monitor is attached.
Digital Visual Interface (DVI-I)
The DVI-I port supports both digital and analog DVI displays. The maximum
supported resolution is 1900 x 1200 (WUXGA). The DVI port is compliant with the
DVI 1.0 specification. The DVI analog output can be converted to VGA using a DVI-
VGA converter.