Intel Desktop Board DP43BFL Product Guide
50
Connecting to the Audio System
After installing the audio driver, the multi-channel audio feature can be enabled.
Figure 23 shows the back panel audio connectors.
Item Description
A Rear surround
B Center channel and LFE (subwoofer)
C S/PDIF digital audio out (optical)
D Line in/Side surround/Headphones
E Mic In
F Front speaker/Headphones
Figure 23. Back Panel Audio Connectors
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
To Next Page
Loading...
Need help?
General
