Intel DX58OG User Manual

Desktop Board Features
25
Wake from Consumer IR
Consumer IR device activity wakes the computer from an ACPI S3, S4, or S5 state.
Onboard Power and Reset Switches
The board contains the following lighted button switches that can be used to control
board operation:
• Power
• Reset
Figure 5. Onboard Power and Reset Switches
The power button switch (see Figure 5, A) can be used to turn the desktop board on or
off. This power button switch behaves the same as a chassis power switch connected
via the front panel header. The onboard power button switch does not remove
standby power. To turn off the computer using the onboard power button switch,
keep it pressed down for three seconds.
The reset button switch (see Figure 5, B) can be used to r
e
set the desktop board. This
power button switch behaves the same as a chassis reset switch connected via the
front panel header. When the reset button switch is pressed, the board resets and
runs the POST.

Intel DX58OG Specifications

General

Brand	Intel
Model	DX58OG
Category	Motherboard
Language	English