Installing and Replacing Desktop Board Components
35
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer. Failure to do so could damage the
processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 31.
2. Unlatch the
processor socket lever by pushing it down and away from the socket
(Figure 9, A, B).
Figure 9. Unlatch the Processor Socket Lever
To Next Page
Loading...
Need help?
General
