Intel Express 410T

740604-001
Intel
®
Express 410T
Standalone Switch
Quick Start and User Guide
English
Français
Italiano
Deutsch
Español
*740604-001*
410T-QS-GD cover-1.p65 4/7/99, 3:10 PM1

Intel Express 410T Specifications

General

Brand	Intel
Model	Express 410T
Category	Switch
Language	English

Summary

Quick Start

Install the Switch

Instructions for installing the Intel Express 410T Standalone Switch.

Connect the Devices

Guidelines for connecting PCs, print servers, and other switches.

Check the Connections

How to verify link status using port LEDs.

Optional Information

Change Port 1 from MDI-X to MDI

Procedure to change Port 1 from MDI-X to MDI for connectivity.

Access the Configuration Screen

Steps to connect to and use the switch's serial configuration screen.

Understanding 410 T Switches

Local Management

Functions

Port Speed Configuration

How to configure port speed settings (Auto, 100Mbps, 10Mbps).

Port Duplex Configuration

How to configure port duplex settings (Half, Full, Auto).

Flow Control Configuration

How to enable or disable flow control on ports.

Save and Reset Settings

Connecting to Devices

Connection Guidelines

Cabling

Requirements for UTP cables (CAT 5, CAT 3/4) and cable types.

Cabling Devices

Media Requirements

Straight-through vs. Crossover Cables

Explanation and pinouts for straight-through and crossover Ethernet cables.

Testing a cable

FAQsTroubleshooting

Port LED Link Issues

Troubleshooting why the port LED (link) is off after connecting a cable.

Intermittent Link Loss

Diagnosing causes of intermittent link loss or data transmission issues.

Local Management Blank Screen

Intel Customer Support