20
Functions
Description
Port: Displays the ports of the switch.
Speed: Press the z to toggle the field’s options and change the
speed of the port. You can toggle three settings:
Auto = speed and duplex are negotiated automatically
100 = port is forced to 100Mbps
10 = port is forced to 10Mbps
Duplex: Press the z to toggle the duplex setting of the port. When
the port Speed is set to “Auto,” duplex displays a < - > and is handled
automatically.
Flow Control: Press the z to enable or disable flow control. When
the port Speed is set to “Auto” flow control displays a < - > and is handled
automatically.
SAVE SETTINGS: Saves configuration changes and resets the switch
( c + S also saves the settings and resets the switch).
RESET TO DEFAULTS: Resets the switch back to factory defaults. When
this option is selected, the switch asks you to confirm your choice. Press
“Y” (or “y”) for Yes and the switch will reset. Press “N” (or “n”) for No and
the action is cancelled.
Help text at the
bottom of the
screen provides
information on the
selected item.
410T Guide.p65 4/7/99, 3:31 PM20
To Next Page
Loading...
