EasyManua.ls Logo

Intel S1200RP

Intel S1200RP
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started with the
Intel® Server Board S1200RP UEFI Development Kit
2 June 2016
USB FAT-formatted flash drive.
SPI flash programmer with software utility (optional).
Host PC with Microsoft Windows* operating system (optional, for SPI flash).
You must use one of the supported firmware images included in this development kit:
SDV_RP_B6_release.rom/.capThe release version of the firmware, with
debugging features disabled. This is the recommended firmware image.
SDV_RP_B6_debug.rom/.capThe debug version of the firmware, with debug
output redirected to the serial port (COM1).
SDV_RP_B6_srcdbg.rom/.capThe source level debug version of the
firmware, which supports the Intel
®
UEFI Development Kit Debugger Tool using
the serial port (COM1). This image is recommended only for advanced debugging.
FVMAIN.fv – The USB recovery firmware image, based on the release firmware.
The development kit also includes:
Update Utilities for the UEFI Shell: FvUpdate_S1200RP.efi &
CapsuleApp.efi
User documentation, including this guide and the release notes.
1.3 Supported and recommended hardware
components
Table 1 and Table 2 describe the supported and recommended PC hardware
components (respectively) for the Intel® Server Board S1200RP UEFI Development
Kit.
You must use the motherboard and processor listed in the table with the firmware
images provided with the development kit.
Table 1 Supported Hardware and Firmware Components
Hardware and
Firmware
Notes
Intel® Server
Board S1200RP
You must use the commercially available
Intel® Server Board
S1200V3RPS or Intel® Server Board S1200V3RPL. This document
is based on the Intel® Server Board S1200V3RPS.
Intel® Xeon®
Processor E3-1275
v3
You must use the Intel® Xeon® Processor E3-1275 v3
with heat
sink. This processor is available commercially.
Intel® Server
Board S1200RP
UEFI Development
Kit firmware image
You must use one of the firmware images from the Intel® Server
Board S1200RP UEFI Development Kit. The firmware images in the
development kit have been validated to work only with the specific
processor and motherboards listed above.

Related product manuals