Need help?Do you have a question about the Intel S1200BTS and is the answer not in the manual?
General| Chipset | Intel C204 Chipset |
|---|---|
| Form Factor | MicroATX |
| Processor Socket | LGA 1155 |
| Number of Processors Supported | 1 |
| Number of Memory Slots | 4 |
| Processor Support | Intel Xeon E3-1200 series |
| Memory Support | DDR3 ECC UDIMM |
| Expansion Slots | 1 PCI-E x16 Gen3, 1 PCI-E x4 Gen2, 1 PCI-E x1 Gen2, 1 PCI 32bit/33MHz |
| Storage | 4 x SATA 3Gb/s, 2 x SATA 6Gb/s |
| Network Interface | Dual Gigabit Ethernet ports |
| Memory Speed | 1333 MHz |
| RAID Supported | RAID 0, 1, 5, 10 |
| USB Ports | 4 rear |
Explains system integrator responsibilities for airflow and component operation.
Details processor, memory, chipset, and I/O features for S1200BTL and S1200BTS.
Provides visual representations of the server board layout and component placement.
Identifies connectors and major components on the server board layout diagram.
Presents detailed mechanical drawings and component positioning for S1200BTL.
Illustrates the layout of rear I/O components on the server board.
Describes supported processors, including Intel® Xeon® and Core™ i3 series.
Covers memory support, configuration rules, and RAS features for DDR3 DIMMs.
Explains the role of the Intel® C200 Series Chipset and its interfaces.
Details I/O support including DMI, PCI Express, SATA, and USB interfaces.
Describes the integrated BMC controller and its subsystems and features.
Outlines IPMI 2.0 and Non-IPMI features supported by the BMC.
Explains advanced management features provided by the Integrated BMC firmware.
Discusses thermal management features including throttling and fan speed control.
Details Node Manager technology for processor power consumption and thermal capping.
Covers BIOS POST display, identification strings, and version information.
Lists recognized HotKeys for system control during the Power-On Self Test.
Guides users on configuring system settings via the text-based BIOS Setup utility.
Lists all available board connectors, headers, and their corresponding reference designators.
Details pin-out information for the baseboard power connectors.
Provides pin-out details for system management headers like RMM4 Lite.
Details the pin-out for the 24-pin SSI front panel connector.
Covers pin-out details for various I/O connectors including VGA, NIC, SATA, Serial, USB.
Explains procedures for clearing CMOS settings and resetting BIOS passwords.
Details the procedure for forcing an Integrated BMC firmware update.
Explains how to use the BIOS recovery jumper to flash the normal BIOS.
Describes the behavior and interpretation of the front panel system status LED.
Explains how to use POST code diagnostic LEDs for troubleshooting boot issues.
Lists operating temperature, voltage, shock, and vibration specifications.
Provides guidance on power supply selection and voltage/current ratings.
To Next Page