EasyManuals Logo

Intel S1200BTS User Manual

Intel S1200BTS
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Jumper Blocks Intel® Server Board S1200BT TPS
Revision 1.0
Intel order number G13326-003
108
1. Power down and remove the AC power cord.
2. Open the server chassis. For instructions, see your server chassis documentation.
3. Move jumper from the default operating position (covering pins 1 and 2) to the enabled
position (covering pins 2 and 3).
4. Close the server chassis.
5. Reconnect the AC cord and power up the server.
6. Perform the ME firmware update procedure as documented in the README.TXT file
that is included in the given ME firmware update package (same package as BIOS).
7. Power down and remove the AC power cord.
8. Open the server chassis.
9. Move jumper from the enabled position (covering pins 2 and 3) to the disabled position
(covering pins 1 and 2).
10. Close the server chassis.
11. Reconnect the AC cord and power up the server.
8.4 BIOS Recovery Jumper
The following procedure boots the recovery BIOS and flashes the normal BIOS:
1. Turn off the system power.
2. Move the BIOS recovery jumper to the recovery state.
3. Insert a bootable BIOS recovery media containing the new BIOS image files.
4. Turn on the system power.
The BIOS POST screen will appear displaying the progress, and the system will boot to the EFI
shell. The EFI shell then executes the Startup.nsh batch file to start the flash update process.
The user should then switch off the power and return the recovery jumper to its normal position.
The user should not interrupt the BIOS POST on the first boot after recovery.
When the flash update completes:
1. Remove the recovery media .
2. Turn off the system power .
3. Restore the jumper to its original position.
4. Turn on the system power.
5. Re-flash any custom blocks, such as user binary
or language blocks.
The system should now boot using the updated system BIOS.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel S1200BTS and is the answer not in the manual?

Intel S1200BTS Specifications

General IconGeneral
ChipsetIntel C204 Chipset
Form FactorMicroATX
Processor SocketLGA 1155
Number of Processors Supported1
Number of Memory Slots4
Processor SupportIntel Xeon E3-1200 series
Memory SupportDDR3 ECC UDIMM
Expansion Slots1 PCI-E x16 Gen3, 1 PCI-E x4 Gen2, 1 PCI-E x1 Gen2, 1 PCI 32bit/33MHz
Storage4 x SATA 3Gb/s, 2 x SATA 6Gb/s
Network InterfaceDual Gigabit Ethernet ports
Memory Speed1333 MHz
RAID SupportedRAID 0, 1, 5, 10
USB Ports4 rear

Related product manuals