Need help?Do you have a question about the Intel S1200RP and is the answer not in the manual?
General| Product Type | Server Board |
|---|---|
| Form Factor | ATX |
| Chipset | Intel C204 |
| Maximum Memory | 32GB |
| Power Connectors | 24-pin ATX, 8-pin EPS |
| Supported Processor | Intel Xeon E3-1200 series |
| Memory Slots | 4 |
| Supported Memory Types | DDR3 |
| Expansion Slots | 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x4, 1 x PCIe 2.0 x1, 1 x PCI |
| Storage Interfaces | 6x SATA (2x SATA 6Gb/s, 4x SATA 3Gb/s) |
| Network Interface | Dual Gigabit Ethernet |
| RAID Support | RAID 0, 1, 5, 10 |
| Management | IPMI 2.0 |
| Socket Type | Socket H2 (LGA 1155) |
| USB Ports | 4 x USB 2.0 (rear), 2 x USB 2.0 (internal) |
Overview of the development kit for designing, testing, and debugging UEFI drivers and applications on a compliant system.
Lists necessary skills, components, and tools for upgrading or installing a UEFI compliant firmware image on the development kit.
Details supported and recommended PC hardware components for the Intel® Server Board S1200RP UEFI Development Kit.
Explains the optional use of a third-party SPI flash programmer for reflashing firmware, especially after corruption.
Recommends jumper settings for disabling BMC and ME to reduce system resets during firmware debugging.
Explains how to enable or disable the Compatibility Support Module (CSM) for managing legacy BIOS support.
Covers PXE boot support for IPv4/IPv6 and UEFI HTTP/HTTPS boot features.
Details how to upgrade firmware using the FvUpdate_S1200RP.efi utility from the UEFI Shell.
Explains the capsule update procedure using the UEFI UpdateCapsule() function with .CAP firmware files.
Provides a procedure to recover partially corrupted system firmware using a FAT32 formatted USB drive.
Outlines steps for firmware installation on motherboards with socketed SPI flash devices using a hardware programmer.
Details firmware installation for motherboards with soldered SPI flash devices using a hardware programmer clip.
To Next Page