Need help?Do you have a question about the Intel S3420GPLC - Server Board Motherboard and is the answer not in the manual?
General| Brand | Intel |
|---|---|
| Model | S3420GPLC - Server Board Motherboard |
| Category | Server Board |
| Language | English |
Lists the documents chapters and appendices.
Provides disclaimer for server board usage and thermal requirements.
Details the features of the S3420GP server board, including processor, memory, chipset, and I/O.
Describes the physical arrangement of components and connectors on the server board.
Identifies connectors and major components on the server board layout diagram.
Illustrates mechanical details like hole and component positions on the server board.
Details the layout of rear I/O connectors for the server board.
Describes the supported processors for the S3420GP, including Xeon, Core i3, and Pentium.
Covers memory configuration, sizing, rules, and limitations for DDR3 DIMMs.
Details the Input/Output capabilities, including PCI Express, SATA, and USB support.
Outlines IPMI 2.0 and non-IPMI features for platform management.
Explains advanced management features like KVM redirection and media redirection.
Details the Super I/O features, including hardware monitor and fan control.
Describes the utility for viewing event logs in BIOS setup.
Details the text-based utility for system configuration and viewing settings.
Explains the structure and guidelines for BIOS setup utility screens.
Allows viewing and configuring processor-related options and information.
Displays details about installed system DDR3 DIMMs and configuration.
Allows configuration of SATA/SAS controllers and ports.
Enables setting user/administrator passwords and front panel lockout.
Configures server management features like console redirection.
Displays and configures bootable media and device order.
Provides detailed information on all board connectors, headers, and jumpers.
Details the pin-outs for baseboard and SSI processor power connectors.
Describes pin-outs for RMM3, LCP/IPMB, and HSBP headers.
Details pin-outs for VGA, NIC/USB, SATA, and PCI Express connectors.
Details pin-outs for SSI-compliant 4-pin fan headers.
Describes the function and system results of various server board jumpers.
Provides step-by-step procedures for clearing CMOS and resetting passwords.
Explains the procedure for booting recovery BIOS and flashing the normal BIOS.
Describes the system status LED states and their meaning.
Explains how POST code diagnostic LEDs assist in troubleshooting boot process hangs.
Lists operating conditions and environmental specifications for the server board.
Details voltage and current specifications for system power.
Specifies power supply load ratings and grounding requirements for system designers.
Defines voltage limits for steady state and dynamic loading conditions.
Describes over-current and over-voltage protection mechanisms in the power supply.
Details intended applications and general compliance requirements.
Lists safety certifications like CSA, CE, and UL.
Lists EMC compliance standards and requirements.
Provides specific notices for FCC, ICES, Europe, and VCCI compliance.
Lists POST error codes, messages, and their handling responses.
Lists POST error beep codes and their corresponding descriptions.
To Next Page