Intel S3420GPLC - Server Board Motherboard

Intel® Server Board S3420GP TPS BIOS User Interface
Revision 2.4
Intel order number E65697-010
59
Setup Item Options Help Text Comments
SATA Port 0 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 1 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 2 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 3 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 4 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 5 < Not
Installed/Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
6.3.2.2.4 Serial Ports Screen
The Serial Ports screen allows the user to configure the Serial A [COM 1] and Serial B [COM2]
ports.
To access this screen from the Main screen, select Advanced > Serial Port.

Advanced

Serial Port Configuration
Serial A Enable Enabled/Disabled
Address 3F8h/2F8h/3E8h/2E8h
IRQ 3 or 4
Serial B Enable Enabled/Disabled
Address 3F8h/2F8h/3E8h/2E8h
IRQ 3 or 4
 
Figure 24. Setup Utility – Serial Port Configuration Screen Display
Table 23. Setup Utility – Serial Ports Configuration Screen Fields
Setup Item Options Help Text
Serial A
Enable
Enabled
Disabled
Enable or Disable Serial port A.
Address 3F8h
2F8h
3E8h
2E8h
Select Serial port A base I/O address.