Intel STL2 - Server Board Motherboard User Manual

A guide for technically qualified persons
Intel
®
Server Board STL2
Quick Start Guide
Before You Begin.....................................................................2
Installation Notes
Installation Process Quick Reference ........................................... 4
Common Problems.......................................................................5
Server Board Components............................................................6
Back Panel Connectors.................................................................7
Jumpers ........................................................................................8
Installation Procedures
Installing Processors....................................................................10
Install the Processor Terminator.................................................. 15
Install the Voltage Regulator Module..........................................16
Memory.......................................................................................17
Install the I/O Shield....................................................................18
Rearrange the Standoffs...............................................................19
Install the Server Board Bumpers................................................20
Install the Server Board............................................................... 21
Connect Cables............................................................................ 22
Finish Setting up Your Chassis....................................................23
Getting Help................................................................................ 24
Translations of this guide are available at:
Übersetzungen dieses Handbuchs sind erhältlich bei:
Versiones traducidas de esta guía se encuentran disponibles en:
Des traductions de ce guide sont disponibles à l'adresse:
Le versioni tradotte di questa Guida sono disponibili presso:
As traduções deste guia estão disponíveis em:
      
http://support.intel.com/support/motherboards/server/STL2/manual.htm
Copyright © 2000 Intel Corporation. All rights reserved. No part of this document may be
copied, or reproduced in any form, or by any means without prior written consent of Intel.
Intel Corporation (Intel) makes no warranty of any kind with regard to this material, including,
but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Intel assumes no responsibility for any errors that may appear in this document. Intel makes
no commitment to update nor to keep current the information contained in this document.
†
Third-party brands and trademarks are the property of their respective owners.
Order Number: A28574-001

Intel STL2 - Server Board Motherboard Specifications

General

Brand	Intel
Model	STL2 - Server Board Motherboard
Category	Server Board
Language	English

Summary

Before You Begin

Installation Notes

Installation Process Overview

Provides a quick overview of installation steps and where to find related information.

Common Installation Problems

Details common issues encountered during system setup and their solutions.

Server Board Component Identification

Identifies and labels the various components and connectors on the server board.

Back Panel Connection Guide

Illustrates and names the connectors located on the server board's rear panel.

Jumper Configuration Settings

Explains the configuration jumpers and their functions for system setup.

Installation Procedures

Installing Processors and Heatsinks

Step-by-step guide for installing the CPU(s) and associated cooling components.

Installing Processor Terminator

Instructions for installing a terminator in the secondary processor socket for single-CPU setups.

Installing Voltage Regulator Module (VRM)

Guide for installing the VRM, necessary for dual-processor configurations.

Memory Module Installation

Details on installing RAM modules, including specifications, slot usage, and compatibility.

Installing the I/O Shield

Instructions for fitting the I/O shield into the chassis for proper port alignment.

Rearranging Chassis Standoffs

Guide on correctly positioning chassis standoffs for server board mounting to prevent damage.

Installing Server Board Mounting Bumpers

Steps to attach rubber bumpers to the chassis wall for server board support.

Mounting the Server Board

Procedure for securing the server board into the chassis using mounting screws.

Connecting Internal Cables

Instructions for connecting various power, data, and fan cables to the server board.

Final Chassis Setup and Cable Routing

Final steps for setting up the chassis, including drive installation and cable routing.

Getting Help and Support