Need help?Do you have a question about the Intel S3000AH - Entry Server Board Motherboard and is the answer not in the manual?
General| Form Factor | ATX |
|---|---|
| Processor Socket | LGA 771 |
| Maximum Memory | 8GB |
| Chipset | Intel 3000 |
| Memory Slots | 4 |
| Supported Memory Types | DDR2 |
| Expansion Slots | 1 x PCIe x16 |
| SATA | 4 x SATA 3Gb/s |
| RAID Support | RAID 0, 1, 10 |
| Network Interface | Dual Gigabit Ethernet |
| USB Ports | 6 x USB 2.0 |
Read all caution and safety statements in this document before performing any instructions.
Lists supported Intel® Xeon®, Pentium®, and Celeron® processors for the LGA775 package.
Details DIMM socket configuration, minimum operation, and DDR2 requirements.
Specifies minimum 350 Watts requirement and 2A of 5V standby current for the power supply.
Describes BIOS Setup Utility options for changing server configuration defaults.
Explains conditions and prompts for entering BIOS Setup.
Provides guidance on clearing CMOS memory if BIOS Setup cannot be accessed.
Explains BIOS Setup menu structure, features, and user-selectable parameters.
Follow instructions in the readme file to perform the BIOS update.
Provides instructions for installing and removing system memory modules (DIMMs).
Provides instructions and cautions for installing or replacing the system processor.
Step-by-step guide for safely removing a processor from the server board.
Step-by-step guide for safely replacing the system's backup battery.
Describes methods for resetting the system, including soft and cold boot resets.
Addresses common issues arising from incorrect installation or configuration after startup.
A checklist of initial checks to perform when troubleshooting system startup problems.
Details an approach to identifying hardware problems and locating their sources.
Guides on checking system lights to verify POST and device activity.
Explains how to confirm the operating system has loaded correctly after boot.
Lists specific problems and their corresponding corrective actions for troubleshooting.
Troubleshooting steps for when the system's power light is not illuminated.
Troubleshooting steps for when no text or display appears on the monitor.
To Next Page