24 “Intel
®
Server Board S3000AH User’s Guide”
Figure 9. Installing Memory
6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
7. Holding the DIMM by the edges, remove it from its anti-static package.
8. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket. The arrow in the inset in Figure 7 is
pointing to the key in the socket.
9. Insert the bottom edge of the DIMM into the socket.
10. When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.
11. Replace the server's cover and reconnect the AC power cord. See the
documentation that came with your server chassis for instructions on installing the
server's cover.
AF000534
DIMM 1A
Socket
DIMM 2A
Socket
DIMM 2B
Socket
DIMM 1B
Socket
A
C
D
B
To Next Page
Loading...
Need help?
General
