Enterprise Platforms and Services Marketing Monthly Specification Update
Errata
1. Errors are reported during the installation of SuSE SLES 10 EM64T
Problem When installing SuSE* SLES 10 EM64T with Advanced Error Reporting (AER)
capabilites enabled, an AER error is logged in the operating system event log.
Implication AER uses an optional ACPI requirement, -OCS, that is not available in the
S5500 BIOS revisions. There is no functional impact.
Status This issue may be fixed in a future BIOS revision.
Workaround None.
2. Hyper Threading cannot be disabled in BIOS setup
Problem In the BIOS Setup Menu: \Advanced\Processor, setting the Hyper Threading
option to disabled will initially indicate the option is disabled. However, when
the user re-enters BIOS Setup, the option will be enabled.
Implication Users that desire to disable Hyper Threading will not be able to do so.
Status This issue was fixed in BIOS release R0034.
Workaround None
3. A critical interrupt is logged in the System Event Log (SEL) when
installing SuSE SLES 10 32 bit
Problem A critical interrupt, PCIe Fat Sensor –[severity] event: Critical Interrupt, is
looged during the installation of SuSE SLES 10 32 bit.
Implication The user will see a PCIe crtical event looged. There is no functional impact.
Status No Fix.
Workaround Ad “noisapnp” to the command line option to prevent scanning of a ISA plug
and play devices.
4. Serial Console mode may display extra text or intermingled text
Problem When operating in serial console mode, during POST the user may notice 1 of
2 conditions.
To Next Page
Loading...
Need help?
General
