Monthly Specification Update Enterprise Platforms and Services Marketing
1. The user may see the numeral 10 displayed at the top right corner of
the screen or,
2. The RAID controller information may be intermingled with the platform
information displayed by BIOS.
Implication There is no functional impact associated with this erratum.
Status This issue was fixed in BIOS release R0038.
Workaround None.
5. The PXE boot option is missing in BIOS Setup
Problem If a user disables the primary (onboard) video in BIOS Setup, the PXE boot
option will disapear from the BIOS Boot Manager.
Implication Users that desire to utilize the PXE boot option must leave the primary
(onboard) video enabled.
Status This issue may be fixed in a future BIOS revision.
Workaround None.
6. Fans may boost temporarily when BMC is under load
Problem The system fans may boost when the BMC is operating under a heavy load.
This can include large sequential BMC tasks such as viewing the system event
log, configuring the BMC or resetting the system. The fans return to normal
automatically after the BMC operations complete.
Implication The systems fans will run at a higher state temporarily, increasing acoustics.
Status This issue was fixed with BMC 00.36.
Workaround NONE.
7. Extra events may be seen in the SEL during system reset
Problem The BMC may log periodic, spurious SEL events during a system reset. These
events may appear as fan errors or double appearances of normal events. The
spurious fan readings will only happen during reset and are not an indication of
an actual fan failure. Fan failure events that occur during a reboot should be
ignored.
Implication The SEL log may indicate fan errors or double instances of normal events
intermittently.
To Next Page
Loading...
Need help?
General
