Basic Rail Kit Install Guide for Intel® Server Chassis 1
1 Rail Kit Installation Instructions
Use the instructions in this installation guide to install the AXXBASRAIL13 rail kit to
one of the following Intel® products:
• Intel® Server Chassis SR1500
• Intel® Server Chassis SR1550
• Intel® Server Chassis SR1600
• Intel® Server Chassis SR1625
• Intel® Server Chassis SR2400
• Intel® Server Chassis SR2500
• Intel® Server Chassis SR2600
• Intel® Server Chassis SR2625
• Intel® Server System SR1560SF
Before You Begin
Before installing the rail kit, observe these safety guidelines:
1. Turn off all peripheral devices connected to the server.
2. Turn off the server by pressing the power button on the front of the chassis. Then
unplug the AC power cord(s) from the chassis or wall outlet.
3. Label and disconnect all peripheral cables and all telecommunications lines connected
to I/O connectors or ports on the back of the chassis.
4. Provide electrostatic discharge (ESD) protection by wearing an anti-static wrist strap
attached to a chassis ground - any unpainted metal surface - when handling
components.
Tools and Supplies Needed
• Phillips* (cross head) screwdriver (#1 bit and #2 bit)
• Anti-static wrist strap and conductive foam pad (recommended)
To Next Page
Loading...
Need help?
General
