14
4.13 Care of Electrodes:
To avoid skin irritation and ensure good contact with skin, clean silicone rubber electrodes
with soap and water frequently. The electrodes must be dried completely before using.
✽
If you are using self-adhesive electrodes, disregard this procedure.
✽
Always use the electrodes with the requirements of the EN60601-1 and EN60601-2, such as with
CE
mark, or which are legally marketed in the US under 510(K) procedure.
4.14 Care of Electrode cords:
Clean the electrode cords by wiping them with damp cloth. Coating them lightly with
talcum powder will reduce tangles and prolong the life.
4.10 Turn Unit Off:
Turn both Channel Amplitude controls to off. Unplug the electrode lead wires, grasping
them by the plug, not the cord. If treatment will be resumed shortly, the electrodes may be
left on the skin. When the electrodes are removed, clean the skin thoroughly with mild
soap and water. If there is skin irritation, consult your medical professional.
CARE AND MAINTENANCE
4.11 Portability:
Your unit is portable and may be clipped to a belt, shirt pocket, bra, or other clothing.
4.12 Battery:
To replace the battery, open the lid cover and extract the battery. Replace it with a 9 V
alkaline or similar rechargeable battery. Make sure you insert the battery correctly.
13
To Next Page
Loading...
