9.2.5 Proximity Card/Token
-20-
Register Single Card
1. Press[REG-]+card number + [ENTER]
2. The door station will sound a long beep and DOOROPEN LED will ash quickly. You can
register a card by entering the card number (last 8 digits only) or by swiping the card.
3. If the door station says"Sorry, wrong number. Please try again", that means the program
failed, then please repeat step 1.
Note:
Registering cards by card numbers will allow deleting lost cards easily.
Note:
Please pay attention that door station conrms every digit by voice annunciation. If
you hear no conrmation press last digit again. Failing to get voice conrmation will affect
success of programming.
Register continuous cards
1. Press [REG-]+[EXTRA] + the first card number + [DEL+]+card quantity+[ENTER] or
press [REG-]+[EXTRA]+swipe the card +card quantity+[ENTER]
2. The door station will sound a long beep and DOOROPEN LED will ash slowly
3. If the door station says"Sorry, wrong number. Please try again", that means the program
aled, then please repeat step 1.
4. Note: Please pay attention that door station conrms every digit by voice annunciation.
If you hear no conrmation press last digit again. Failing to get voice conrmation will
affect success of programming.
Delete single cards
1. Press[DEL+]+card number+[ENTER] or press [DEL+]+swipe the card.
2. The door station will sound a long beep and DOOROPEN LED will ash slowly.
3. If the door station says"Sorry, wrong number. Please try again", that means the program
aled, then please repeat step 1.
Note:
Please pay attention that door station conrms every digit by voice annunciation. If you
hear no conrmation press last digit again. Failing to get voice conrmation will affect success of
programming
NOTE:
If cards were registered by swiping and you want to delete lost card which is not present,
you will have to delete all programmed cards at once and register remaining cards again (see
next chapter)
To Next Page
Loading...
Need help?
General
