Intellinet GuestGate - Accessing and Securing the Administrator Interface; Locating GuestGate IP Address via DHCP; Initial Administrator Login Procedure

8
8
Accessing the Administrator Web Interface from the Host
Interface
1. Open the log of your DHCP server to find the IP address of GuestGate.
GuestGate’s MAC (media access control) address can be found on the
bottom of the device. Find this MAC address in your DHCP server’s client
log to determine the IP address.
Below is an example of a DHCP log file:
2. Launch your Web browser and open the IP address shown in the DHCP
client log. You will then see the administrator Web interface. The default
password is 1234.
Changing the Administrator Password
1. Click on “Device Settings.”
INSTALLATION