What to do if intensity IF COMBO DI4738 Medical Equipment stimulation is weak?
If the intensity stimulation of your Medical Equipment feels weak, it might be due to dried out or contaminated electrodes, or old, worn, or damaged lead wires. Consider replacing and reconnecting the electrodes and replacing the lead wires.
Why is intensity Medical Equipment stimulation uncomfortable?
Uncomfortable stimulation from your intensity Medical Equipment can occur if the intensity is too high, the electrodes are too close together, the electrodes or lead wires are damaged or worn, or the electrode active area size is too small. Try decreasing the intensity, repositioning the electrodes, or replacing the electrodes, ensuring the replacements have an active area of no less than 16.0cm2 (4cm*4cm).
How to fix intensity IF COMBO DI4738 display that fails to light up?
If the display of your intensity Medical Equipment fails to light up, the issue might be due to battery contact failure. Here's what you can do: * Try using fresh batteries. * Make sure the batteries are correctly inserted. * Check that all contacts are in place and not broken.
What to do if intensity IF COMBO DI4738 Medical Equipment has intermittent output?
If your intensity Medical Equipment experiences intermittent output, it could be due to lead wire issues or the program option in use. First, verify the connection is secure. If the problem persists, turn down the intensity and rotate the lead wires in the socket by 90 degrees. If it's still intermittent, replace the lead wire. Some programs will seem intermittent, which is expected.
Why intensity IF COMBO DI4738 Medical Equipment stimulation is ineffective?
Ineffective stimulation from your intensity Medical Equipment may be caused by improper electrode and applicator placement. Reposition the electrode and applicator.
Details the specific conditions and types of pain for which the InTENSity™ IF Combo stimulator is indicated.
Lists medical conditions and situations where the device should not be used to ensure patient safety.
Outlines critical safety precautions, warnings, and potential adverse effects associated with device use.
Discusses the types of disposable and reusable electrodes recommended for use with the device.
Details the correct method for applying electrodes to the skin for optimal contact and stimulation.
Offers guidance on the importance of electrode placement for successful therapy outcomes.
Details the steps for setting up programs, timer, pulse width, and pulse rate in TENS mode.
Outlines the process for configuring programs, timer, and interference frequency in IF mode.
Describes how to safely adjust the stimulation intensity for each channel to a comfortable level.
General| Model | IF COMBO DI4738 |
|---|---|
| Accuracy | ±5% |
| Type | Infusion Pump |
| Infusion Modes | Continuous, Intermittent |
| Power Supply | 100-240V AC, 50/60Hz |
| Display | LCD |
| Alarms | Occlusion, Air-in-line, Infusion Complete, Low Battery |
To Next Page
