EasyManuals Logo

intensity IF COMBO DI4738 User Manual

intensity IF COMBO DI4738
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
TENSPros
4) Between uses, store the electrodes in the resealable bag in a cool
dry place.
Caution:
1) Do not pull on the electrode wire. Doing so may damage the
wire and electrode.
2) Do not apply to broken skin.
3) The electrodes should be discarded when they are no longer
adhering.
4) The electrodes are intended for single patient use only.
5) If irritation occurs, discontinue use and consult your
clinician.
6) Read the instructions for use of self-adhesive electrodes
before application.
7) Always use the electrodes with the requirements of the
IEC/EN60601-1, ISO10993-1/-5/-10 and IEC/ EN60601-1-2,
such as with CE mark, or are legally marketed in the US
under 510(K) procedure.
6.4 Cleaning the Electrode‘s cords
Clean the electrode cords by wiping them with a damp cloth. Coating
them lightly with talcum powder will reduce tangles and prolong the
life.
6.5 Maintenance
Maintenance and all repairs should only be carried out by an
authorized agency. The manufacturer will not be held responsible for
the results of maintenance or repairs by unauthorized persons.
The user must not attempt any repairs to the device or any of its
accessories. Please contact the retailer for repair.
Opening of the equipment by unauthorized agencies is not allowed
and will terminate any claim to warranty.
Check the unit before each use for signs of wear and/or damage.
Replace wear items as required.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the intensity IF COMBO DI4738 and is the answer not in the manual?

intensity IF COMBO DI4738 Specifications

General IconGeneral
Brandintensity
ModelIF COMBO DI4738
CategoryMedical Equipment
LanguageEnglish

Related product manuals