intensity IF COMBO DI4738 User Manual

TENSPros
4.11. Turn OFF
Press [
] button and hold for approx.3 seconds to turn OFF the
device.
Caution:
1) If there is no operation in the panel for 2 minutes in the
waiting state, the device will be turns off automatically.
2) In shutdown state, keep pressing the channel 2 [▼] first, and
then press [
]button at the same to restore factory
parameter settings
4.12. Low battery indicator
A battery symbol is shown on the display when the battery is almost
empty. As long as the stimulator is working normally you can
continue the treatment. When stimulation feels weaker than usual or
the stimulator turns off, it is time to replace the new battery.
5. Program
Mode Program
Modulation
Method
Frequency
Pulse
Width
Treat time
TENS
P1 Burst 0.5-5Hz
50-
300us
1-60min,continous
P2 Continuous 1-150Hz
50-
300us
1-60min,continous
P3
Pulse width
modulation
1-150Hz
50-
300us
1-60min,continous
P4
Frequency
modulation
1-150Hz
50-
300us
1-60min,continous
IF
P1
Frequency
modulation
4kHz
4001-
4010Hz
125us 1-60min,continous
P2
Frequency
modulation
4kHz
4001-
4150Hz
125us 1-60min,continous
P3
Frequency
modulation
4kHz
4080-
4150Hz
125us 1-60min,continous
P4
Frequency
modulation
4kHz
4001-
4150Hz
125us 1-60min,continous

intensity IF COMBO DI4738 Specifications

General

Brand	intensity
Model	IF COMBO DI4738
Category	Medical Equipment
Language	English