Intenza 450TI2S - Central Control Center Overview

To Next Page

To Previous Page

Intenza Treadmills Handbook. Central Control Centre Overview

Central Control Center Overview

...................................................................................................

Quick Start

Initiate the motor to begin at 1 kph / 0.6 mph and

0% elevation.

Incline Button

Use this arrow button to change elevation: each

button press represents a 0.5% increment.

Decline Button

Use this arrow button to change elevation: each

button press represents a 0.5% elevation decrease.

Stick Shift

To adjust Intenza Treadmills speed, move speed

control bar upwards or downwards: each motion

represents 0.1 km/h or 0.1 mph change of speed.

Stop/Pause

Press this key once to pause the workout. Press

this key again to display workout information and

exit the workout program. Pause time is set for 3

minutes. The display will count down from 3

minutes. When stop button is pressed, it will go

into pause mode. If the Intenza Treadmills is not

resumed from pause, treadmill will return to

Homepage.

2mph/3kph (Walk) Button

Button preset value is 2mph/3kph (Walk). During

workout, press button to immediately change

speed to preset value of 2mph/3kph.

4mph/6kph (Jog) Button

Button preset value is 4mph/6kph (Jog). During

workout, press button to immediately change

speed to preset value of 4 mph/6kph.

6mph/9kph (Run) Button

Button preset value is 6mph/9kph (Run). During

workout, press button to immediately change

speed to preset value of 6mph/9kph.

Related product manuals