Intenza 450TI2S User Manual

27
Intenza Treadmills Handbook. Trouble Shooting. Error Message
Error Message
When any of the messages listed below appear on the console, please follow the correction procedures outlined, or also refer to the
service manual for more details.
How To Use The Safety Stop Pull Cord
When operating the treadmill, users should attach the Safety Stop clip to T—shirt.
When the lanyard cord is pulled out from the treadmill, the Intenza Treadmills running belt will automatically slow down to
stop. A message will be displayed on the console: CHECK SAFETY KEY . In order to restart the treadmill, re—attach the safety
key to the slot.
Please clamp the clothes with Safety Stop clip.
To prevent unauthorized third party usage, please remove the safety cord and plug and keep it in a safe place.
............................................................................................................................... ....................................................................
SOLUTION
Execute Self Diagnosis function to check error code, then refer to service manual
for trouble shooting
550Te2
·
550Ti 450Ti2 450Ti2S
·
Change console main board
Change console main board
Change console main board
Check the USB stick connection to USB board or, cable from USB board to console
Check cable from display to the inverter, then change the PSB, and finally the inverter
Check safety key is inserted correctly, then check cable
Check running belt, deck condition, then change inverter
Code 90— Check running belt, deck condition
Code 91— Check running belt, deck condition
MESSAGE
NEED MAINTENANCE
CHECK MEMORY
CHECK CONSOLE PCB
CHECK USB COMM
USB STICK FAIL
CHECK IVT OR CABLE
CHECK SAFETY KEY
OVERLOAD
PFC
PFC
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
EN

Intenza 450TI2S Specifications

General

Brand	Intenza
Model	450TI2S
Category	Treadmill
Language	English