Inter-m PSI-5120A User Manual

D
IGITAL PA SYSTEM
5
PSI-5120A/5240A
Front Panel
Front Panel
1. USB TERMINAL
USB terminal input for stored music files, can be played on USB function.
2. TONE CONTROL VOLUME
This is a volume to control tone of signal. You can adjust each frequency band such as
200Hz/500Hz/1.2KHz/3KHz/8KHz. Select the relevant frequency with the tone button and control volume
with the (+/-) button. (Control range: ±8dB)
3. EQUALIZER MODE SELECT BUTTON
If pressing this button once, you can check setting status of the current EQ mode. Whenever you press the
button, the mode changes in order of USER 1 → USER 2 → USER 3 → USER 4 → USER5 → OFF. After
adjusting the tone, press the button long (about 2 seconds), then the setting is saved in the relevant mode.
4. DISPLAY
This is a window to display system information of the operation.
5. INPUT SELECT (FUNCTION) BUTTON
This is a button to select input signal and you can select one of FM TUNER, CD, USB, DRP, AUX 1, AUX 2, or
DIGITAL INPUT. AUX 1/2 is changed whenever pressing the AUX button.
6. DISPLAY MODE SELECT BUTTON
Button to check the remaining time of current selection.

Inter-m PSI-5120A Specifications

General

Brand	Inter-m
Model	PSI-5120A
Category	Speakers
Language	English