Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800 362-6740 for all your
Inter-Tel needs.
Page 15 of 23
4. Press “#” to continue.
5. Press MUTE until the number is erased.
6. Press “#” to exit.
Use Station Speed Dial Numbers:
If necessary, select the outgoing line.
• To use a location number, dial “382” or press the STA SPDL key (if available) and then
enter the station speed dial location number (0-9).
• To use a station speed dial key, press the desired station speed dial key.
System Speed Dial
System speed dial can store up to 1,000 speed dial numbers.
To view and/or dial system speed dial numbers:
1. Press SYS SPDL or dial “381”.
2. Dial the location code (000-999) for the number.
3. Press “#” to dial the number.
Recording a Call
Record-a-Call records an in-progress call as an voice mail message. You can retrieve the
message just like any other message.
To use, Press SPCL, dial “385” and, if required, the desired mailbox number. You will hear a
confirmation tone when recording begins.
To turn off Record-a-Call, either press SCL and dial “385” or hang up.
Paging
To prevent announcements from sounding over every phone in the system by using page zones.
Each of the nine zone contains extensions and external paging equipment, as programmed by
your system administrator.
To page
Either lift the handset, dial “7” and the desired zone number (0-9) or press the PAGE ZONE key if
available and dial the zone number. Make your announcement and hang up.
Enable/Disable Paging on Your Phone
Dial “325” to enable or disable.
Programming Feature Keys
Some of your feature keys may be programmable. Check with your system administrator for
details.
To program:
1. While on-hook, dial “397”.
2. Press the feature key to program.
3. Dial the feature code or extension number to be stored.
To return all keys to their default values, while on-hook, dial “395”.
To Next Page
Loading...
