SYSTEM AND STATION SPEED DIALING
SPEED DIALING SPECIAL
COMMON
CARRIER (SCC) N0MBERS STORED IN
SEPARATE LOCATIONS
A keyset user may chain speed-dial numbers together for dialing
SCC services. SCC dialing requires the SCC local telephone num-
ber, your access code, and the long distance telephone number you
want to dial.
If desired, these numbers can be stored separately
as station or system speed-dial numbers and can be dialed in the
order needed.
To speed dial SCC numbers:
(1)
(2)
(3)
(4)
(5)
(6)
Lift the handset and press an unlit line key.
Press the SPDL key. The SPDL key lights.
Dial the memory location code (l-9 or 001-030) for the SCC
local telephone number. The number is dialed and the SPDL
key is unlit.
After the special dial tone, press the SPDL key. The SPDL
key lights.
Dial the memory location code (l-9 or 001-030) for the SCC
access code. The number is dialed and the SPDL key is unlit.
EITHER, press the SPDL key (the SPDL key lights) and dial the
memory location code (l-9 or 001-030) of the long distance
number. The number is dialed and the SPDL key is unlit.
OR, manually dial the long distance number if it is not
stored in speed-dial memory.
GLX Owner's Guide (Issue 1, 11/85) Page 23
To Next Page
Loading...
