c
CALL WAITING
There are two types of call waiting: intercom call waiting and
outside call waiting.
An incoming intercom call or transferred
outside call camps on and the caller hears music (if available)
until the busy party hangs up; a direct outside call rings in and
the caller hears ringing.
INTERCOH CALL WAITING
The busy keyset user is alerted to the call waiting by a double
ring tone every 6 seconds and a slow-flashing SYS HOLD key.
To respond to an intercom call waiting while on an intercom call:
Press the slow-flashing SYS HOLD key.
You are disconnected from
the current call and connected to the waiting call.
To respond to an intercom call waiting while on an outside call:
EITHER, hang up;
the waiting intercom call rings in.
OR.
place the outside call on hold by pressing the slow-
flashing SYS HOLD key (Executive Keyset users can press the
HOLD key). The waiting intercom call is connected and the
line key double flashes.
To disconnect from the intercom
call and reconnect to the outside call on hold, press the
double-flashing line key.
OUTSIDE CALL WAITING
The busy keyset user hears a short ring tone every 6 seconds. If
the waiting call is a direct ring-in call, the keyset user sees a
slow-flashing line key. If it is a transferred outside call, the
user sees a double-flashing line key.
To answe.r an outside call waiting while on an intercom call:
Press the flashing line key. You are disconnected from the in-
tercom call and connected to the waiting call.
To answer an outside call waiting while on another outside call:
EITHER,
press the flashing line key; you are disconnected
from the current call and connected to the waiting call.
OR, press the SYS HOLD or HOLD key to place the current call
on hold. The line key for that call double flashes. Press
the flashing line key to answer the waiting call.
To return
to the holding call, press the double-flashing line key.
.:’
GLX' Owner's Guide (Issue 1, 11/85) Page 27