CONFERENCE CALLS
*
To exit the conference and leave other parties connected in an
unsupervised conference: Hang up. You hear a triple ring tone
every 15 seconds and see the medium-flashing CNF key. To re-
enter the conference, lift the handset and press the medium-
flashing CNF key.
Note :
If the conferenced parties hang up, the conference circuit
remains busy until it is released by the initiating party. If
the circuit is not released when the unsupervised conference
timer expires (90 minutes), the circuit is dropped and any con-
ferenced parties are disconnected.
To end the conference and release the conference circuit (initi-
ating keyset only): During the conference, press the asterisk
("1 key.
All parties are disconnected and the conference circuit
is dropped.
PAGING
Keyset users can make pages to one internal zone or one external
zone. Internal zone pages are heard through the speaker of every
idle keyset. External pages are heard through the external pag-
ing network. If desired, individual keysets can
be
removed from
the internal paging zone by enabling keyset option 1 during key-
set features programming.
To make a page:
(1) Lift the handset.
(2) EITHER, press the PAGE key for an internal page.
OR, press the E-PAGE key for an external page.
(3) After the triple ring tone,
make your announcement.
GLX Owner's Guide (Issue 1, 11/85) Page 29
To Next Page
Loading...
