Need help?Do you have a question about the Interacoustics affinity 2.0 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Range | 125 Hz to 8000 Hz |
| Intensity Range | -10 dB to 120 dB HL |
| Testing | Air conduction, bone conduction, speech testing |
| Special tests | ABLB, SISI, Stenger, Tone Decay |
| Connectivity | USB |
| Transducers | Headphones, bone vibrator, insert earphones |
| Display | Touchscreen LCD |
Defines the product's purpose and approved applications for hearing health professionals.
Lists all components provided with the Affinity2.0, including optional accessories.
Crucial safety and operational warnings to prevent injury or equipment damage.
Procedures for checking the received hardware for damage and completeness.
Identifies and describes all ports and connectors on the Affinity hardware.
Guide for installing the Affinity2.0 Suite software on compatible Windows operating systems.
Steps to install necessary drivers for the Affinity hardware to function with the software.
Details on operating the tone generation interface for audiometric tests.
Instructions for speech testing features, including input levels and speech lists.
Guide to performing Real-Ear Measurements using the REM440 module.
Instructions for conducting Hearing Instrument Testing with the HIT440 module.
Recommendations for routine instrument care to ensure optimal performance and safety.
Procedures and responsibilities for obtaining service and repair for the equipment.
Data on transducer calibration, including RETSPL and Max HL values.
Detailed technical information on the pin configuration for all hardware connectors.
Information on the device's EMC compliance and recommended operating environment.
To Next Page
