Interacoustics affinity 2.0 - Reference Equivalent Threshold Values for Transducers; Pin Assignments; Electromagnetic Compatibility (EMC)

Affinity Instructions for Use - US Page 54
Sp. 1-4 Power Out
70Hz-20kHz ±3dB
DC
Voltage: 5VDC
Current: 0.5A
TB Loop
Up to 100mA/meter
70Hz-20kHz ±3dB
FF Loop
Batt. Sim.
Voltage: 1.1 – 1.6VDC
Impedance range: 0 – 25 Ω.
Batt. Sim. - Internal TB
(Affinity2.0
.0
only)
Data Connections
USB/PC
USB B socket for connection to PC
(compatible with USB 1.1 and later)
USB
USB A socket for connection of other USB devices
(Internal USB 1.1 hub)
Keyb.
Serial Peripheral Interface Bus (SPI interface)
Check the Service manual for more information.
Internal test box:
Built in test box holds telecoil drive as well as special dual speaker set for checking directional
microphone function.
Supported Systems
Windows® 7 (32 and 64 bit)
Window® 8 (32 and 64 bit)
Windows® 10 (32 and 64 bit)
Dimensions (LxWxH)
Affinity2.0
.0
: 42 x 38 x 14 cm / 16.5 x 15 x 5.5 inches
Weight
Affinity2.0
.0
: 5.5 kg / 12.1 lbs.
Power supply
100-240 V~, 50-60Hz
Power Consumption:
195VA
Operation environment
Temperature: 15-35°C
Re. Humidity: 30-90% Non condensing
Transport and storage
Transport temperature: -20-50°C
Storage temperature: 0-50°C
Re. Humidity: 10-95% Non condensing
5.1 Reference Equivalent Threshold Values for transducers
See Appendix in English in the back of the manual.
5.2 Pin Assignments
See Appendix in English in the back of the manual.
5.3 Electromagnetic Compatibility (EMC)
See Appendix in English in the back of the manual.