Affinity
Instructions for Use - US Page 6
2.2 Marking
The following marking can be found on the instrument:
Patient applied parts that are not conductive and can be immediately
released from the patient.
or
Refer to instruction manual
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
Failing to do so may endanger the environment.
0123
The CE-mark indicates that Interacoustics A/S meets the
requirements of Annex II of the Medical Device Directive
93/42/EEC. TÜV Product Service, Identification No. 0123,
has approved the quality system.
Headphones, patient response switches and other accessories shall be plugged into the appropriate
connectors as indicated on the rear of the instrument and the overview below: