Interacoustics affinity 2.0 User Manual

Affinity Instructions for Use - US Page 17
2.6 Using with Databases
2.6.1 Noah3
If you are using HIMSA’S Noah3 and you want a button shortcut for the installed module, please
follow these steps.
1. Start Noah3
2. Go to the menu item “Tools”
3. Select “Module buttons”
4. Choose one of the two available buttons and select the software name in the drop down list.
5. Press “OK” and your module will be launched when the appropriate button gets pushed.
2.6.2 Noah 4
If you are using HIMSA’s Noah 4, the Affinity software will install itself automatically in the menu bar on the
start page, along with all the other software modules.
Working with OtoAccess™
If you want to launch the software suite from OtoAccess™ this is also possible.
1. Start the database by clicking on the OtoAccess™ shortcut or select the OtoAccess™ from the
“Start” menu.
2. Select a patient from the list in the “Client” tab
3. Double click on the Affinity2.0 Suite icon under “Select Instrument”
For further instructions about working with the database, please see the operation manual for OtoAccess™.

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English