D-0128588-D – 2022/02
VRA Screen - Instructions for Use - EN Page 13
5 Care and maintenance
5.1 General maintenance procedures
• Bef ore cleaning, always switch of f and disconnect f rom the power supply
• Use a sof t cloth lightly dampened with a cleaning solution to clean all exposed surf aces
• Do not autoclave, sterilize or immerse the instrument or accessory in any f luid
• Do not use hard or pointed objects to clean any part of the instrument or accessory
• Do not let parts that have been in contact with f luids dry bef ore cleaning
Recommended cleaning and disinfection solutions:
• Warm water and soap
• In special cases, e.g., during virus outbreaks should the device be disinf ected using isopropyl
alcohol.
5.2 Repair
DGS Diagnostics A/S is only considered to be responsible for the validity of the CE marking, ef fects on
saf ety, reliability and performance of the equipment if :
1. assembly operations, extensions, readjustments, modif ications, or repairs are carried out by
authorized persons.
2. the electrical installation of the relevant room complies with the appropriate requirements, and
3. the equipment is used by authorized personnel in accordance with the documentation sup-
plied by Interacoustics.
The customer shall reach out to the local distributor to determine the service/repair possibilities
including onsite service/repair. It is important that the customer (through local distributor) f ills out the
RETURN REPORT every time when the component/product is sent for service/repair to
Interacoustics.
This should also be done every time an instrument is returned to Interacoustics. (This of course also
applies in the unlikely worst-case scenario of death or serious injury to a patient or user).
This device is manufactured by:
DGS Diagnostics A/S
Audiometer Allé 1
5500 Middelfart
Denmark
To Next Page
Loading...
