D-0128588-D – 2022/02
VRA Screen - Instructions for Use - EN Page 2
2 Unpacking and installation
2.1 Unpacking and inspection
Check for damage
When you receive the VRA Screen system, please check the shipping box for rough handling and damage. If
the box is damaged, you should keep it until the contents of the shipment have been checked mechanically
and electrically. If your VRA Screen is faulty, please contact your local distributor. Keep the shipping material
f or the carrier’s inspection and insurance claim.
Keep carton for future shipment
The instrument comes with shipping cartons, which are specifically designed for the components. It is recom-
mended to keep the cartons f or future shipments in case of any need f or return or service.
2.2 Reporting imperfections
Inspect before connection
Prior to connecting the product, you should inspect it once more for damage. You should visually check the
cabinet and the accessories for scratches and missing parts.
Report any faults immediately
Any missing parts or malf unctions should be reported immediately to the supplier of the instrument together
with the invoice, serial number, and a detailed report of the problem. At the end of this manual, you will f ind a
"Return Report", where you can describe the problem.
Please use the "Return Report"
Use of the return report provides the service engineer with the relevant inf ormation to investigate the re-
ported issue. Without this inf ormation, there may be diff iculty in determining the fault and repairing the de-
vice. Please always return the device with a completed Return Report in order to guarantee a satisf actory
repair.
2.3 Safety precautions
Read these instructions caref ully and completely bef ore using the product.
2.3.1 Cautions – general
If the system is not f unctioning properly, do not use it until all necessary repairs are made and the unit
is tested f or proper functioning in accordance with Interacoustics’ specif ications.
Do not drop or in any other way cause undue impact to this device. If the instrument is damaged, re-
turn it to the manuf acturer f or repair. Do not use the instrument if any damage is suspected.
This product and its components will perf orm reliably only when operated and maintained in accord-
ance with the instructions contained in this manual, accompanying labels, and/or inserts. A defective
product should not be used. Make sure all connections to external accessories are secured properly.
Parts which may be broken or missing or are visibly worn or distorted should be replaced immediately
with clean, genuine replacement parts manufactured by or available from Interacoustics.
To Next Page
Loading...
