Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 135
An exception can contain up to 4 action lists.
Choose “Action list” to select an action.
Choose “Remove” to remove an action list from the exception.
7.4.n.10 Delete exception
To remove an exception, select an exception using the cursor, or by entering the
exception number, and go to the Delete exception menu.
The display shows:
Choose Ok and press Enter. This removes the exception.
Repeat the command to delete other exceptions, or press Clear to exit and return
to the higher menu level.
Notes
• You cannot delete an exception unless your user group authorizes you to do
so.
• You cannot delete an exception if you have actions or action lists assigned to
it.
To Next Page
Loading...
