Interlogix Advisor Advanced ATS1000A-MM - Programming Map

Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 251
Programming Map
1 Service menu
1.1 Display logs
1.2 Test menu
1.2.1 Input tests
1.2.1.1 Show open zones
1.2.1.5 Cam range test
1.2.1.2 Number of used zones
1.2.1.6 Inactive days
1.2.1.3 RF RSSI test
1.2.1.7 Zone kOhm
1.2.1.4 RF diagnostics
1.2.2 ShockSens test
1.2.3 Outs&triggers
1.2.3.1 Output test
1.2.3.1.1 Outputs
1.2.3.1.2 Keypad LEDs
1.2.3.2 Trigger state
1.2.4 Alarms and faults
1.2.5 Walk test
1.2.5.1 Walk test start
1.2.5.2 Walk test opts
1.2.5.2.1 Use internal siren
1.2.5.2.2 Use buzzers
1.2.5.3 Single zone WT
1.2.5.2.3 Log untested
1.2.5.4 Special WT mode
1.2.5.2.4 Zone tamper
1.2.5.2.5 Rkp/Exp tamper
1.2.5.2.6 Siren tamper
1.2.5.2.7 Frequency
1.2.5.2.8 Need to set
1.2.6 Test call opts
1.2.5.2.9 Reduced walk
1.2.6.n Select central station
1.2.6.n.1 Test call mode
1.2.6.n.4 Freq TC if FTC
1.2.6.n.2 Period / Time
1.2.6.n.5 Man. test call
1.2.6.n.3 Extend
1.2.6.n.6 RSSI in report
1.2.7 IP diagnostic
1.2.7.n Choose interface
1.2.7.n.1 IP statistics
1.2.7.n.3 Ping PC
1.2.7.n.5 NTP status
1.2.7.n.2 Ping host
1.2.7.n.4 Ping CS
1.2.8 GSM diagnostic
1.2.8.1 PIN status
1.2.8.7 Network code
1.2.8.3 GSM net.reg.
1.2.8.8 RSSI
1.2.8.4 GPRS net.reg.
1.2.8.9 Msg sent 24h
1.2.8.5 GPRS state
1.2.8.10 Battery status
1.2.8.6 Network name


