74  Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 
2.2.1.n.3.17 EE 2 buzzer 
   
If the option is set to Yes, the buzzer of the selected keypad is active during 
entry/exit time 2. 
See “18. Entry/Exit 2” on page 235 for more details. 
2.2.1.n.3.18 1+3 keys 
  
If the option is set to Yes, the combination of 1 and 3 keys allows you to raise a 
panic alarm.  
See Advisor Advanced User Guide for more details. 
This functionality is only available for ATS113x keypads. 
2.2.1.n.4 Keypad menu 
 
The keypad menu provides access to the programming menu built-in to the 
keypad. For more information, see the appropriate keypad manual. 
2.2.1.n.5 Delete keypad 
 
To remove the keypad, press Enter, select OK and press Enter again. The 
keypad is deleted. 
Note: Before removing a keypad, you should remove any outputs or condition 
filters connected to the keypad.