Interlogix Caddx User Manual

LED Keypad

RESET FUNCTION
This function is used to reset Smoke Detectors, Zone Troubles, and Zone Tampers.
Your system must be
Disarmed
to use the Reset function.
1.
Press [
7
]-[
7
]. Resets have now been performed.
2.
If the keypad begins beeping, the reset did not execute properly. Enter your
code to silence the keypad. Wait a few minutes and repeat step 2 to attempt
another reset. If the keypad still beeps after repeated attempts, please contact
your installer.
SET SYSTEM DATE
1.
Press the [
7
]-[
9
]-[
6
]-[“
Master Code
”].
Enter the “Day of Week “
1
=Sunday
3
=Tuesday
5
=Thursday
7
=Saturday
2.
2
=Monday
4
=Wednesday
6
=Friday
3.
Enter the “Month Code”. Must always be two (2) digits.
01
= January
02
= February
03
= March
04
= April
05
= May
06
= June
07
= July
08
= August
09
= September
10
= October
11
= November
12
= December
4.
Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [
0
]–[
5
].

5.
Enter the last two digits of the “Year Code”.
Example: For 2007 enter [
0
]–[
7
].
SETTING THE SYSTEM CLOCK
1.
Press [
7
]-[
9
]-[
7
]-[“
Master Code
”].
2.
Enter the “hour code” which must be two (2) digits. NOTE: The clock is a 24-
hour clock. Refer to the following table.
3.
Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [
0
]–[
7
].

Interlogix Caddx Specifications

General

Brand	Interlogix
Model	Caddx
Category	Security System
Language	English