EN - 8 UVD-IP-XP4DNR(-P) Camera
Connecting an analog monitor to set camera
functions
Connect a standard video monitor to the system to adjust the quality of
the video image using the DIP switches. The DIP switches can also be
adjusted when connected to the IP system.
To connect a video monitor:
1. Plug the monitor output cable to the video monitor output
connector (see Figure 1 on page 3).
2. Connect the BNC cable to the video monitor.
3. Adjust the DIP switches as desired.
Setting camera functions
You can set up six camera functions using the DIP switch bank on the
back of the camera. Figure 6 on page 9 shows the DIP switch layout.
White balance (WB)
White balance tells the camera what the color white looks like. Based
on this information, the camera will then display all colors correctly.
There are two methods to determine the WB:
• ATW (auto tracking white balance). The value used depends on
the lighting condition selected. It ensures reliable color
reproduction when lighting conditions change frequently.
• PTL (push-to-lock) white balance. WB is fixed at the moment the
DIP switch it set to ON.
Backlight compensation (BLC)
The backlight compensation function improves image quality when the
background illumination is high. It prevents the object in the center
from appearing too dark.
AI/AE exposure
Use this setting to select the method the camera uses to adjust to
different light levels. Use the Automatic Iris (AI) setting to fix the iris
value at F1.6. Use Auto Exposure (AE) setting to automatically set the
proper exposure according to the existing light conditions.
To Next Page
Loading...
Need help?
General
