To Next PageTo Next Page
Need help?Do you have a question about the Intermatic ET90815CR and is the answer not in the manual?
General| Brand | Intermatic |
|---|---|
| Category | Timer |
| Voltage | 120V |
| Amperage | 15A |
| Horsepower | 1/2 HP |
| Programmable | Yes |
| Display | LCD |
| Contact Type | SPST |
| Enclosure | NEMA 3R |
| Number of Channels | 1 |
| Battery Backup | Yes |
| Shortest ON/OFF time | 1 minute |
| Load Type | Resistive, Inductive |
| Maximum Load | 15A |
| Mounting Type | Surface Mount |
| Type | Electronic |
| Mounting | Wall |
| Indoor/Outdoor | Indoor/Outdoor |
| Dimensions | 5.5 x 3.5 x 2.5 inches |
Critical safety precautions to prevent fire, shock, or death during installation and use.
Details hazard classifications (WARNING, CAUTION, IMPORTANT) and compliance information.
Procedure for wiring applications to the device.
Details electrical specifications for input and output circuits.
Safety advice for outdoor installation using specific conduit hubs.
Procedure for safely connecting power wires to the timer unit.
Instructions for connecting applications to the device terminal boards.
Procedure for installing additional four-circuit relay boards.
Guide to setting the date, time, and daylight saving options.
Steps to define and schedule specific ON/OFF events for circuits.
Selecting circuit operation type (fixed/pulse) and naming events.
Options for setting date, time, and daylight saving time.
Configuring circuit names, event enablement, and manual modes.
Establishing and defining zones to control multiple circuits.
Managing holidays by adding, modifying, or deleting them.
