Intermatic ETW3CP

INITIAL SETUP- CREATING AN INTERMATIC
CONNECT ACCOUNT
Follow these instructions to download, open and register the Intermatic Connect app.
1. Download the Intermatic Connect App from the Apple Store or Google Play Store.
2. Open the app and select “Create Account”.
3. Enter your email and password, select agree to terms and then select “Continue”.
4. Check your email for the 6 digit access code and input in the app when prompted.
ADDING A DEVICE
Follow these instructions to install the timer switch.
1. From Home screen, select the “+” symbol in the upper right of the home
screen then select the “General Purpose Timer” icon on the Device
Setup screen/page.
2. Displayed will be the timer name, type of timer and the type of connection.
Within Bluetooth range of the timer, verify communication by selecting the
“Wink” button on the app and the Mode light will briefly flash yellow.
(typically around 20 - 30 feet)
Intermatic Connect 365-Day
Programmable Smart Wi-Fi Timer
Programming Guide
Models ETW2CP, ETW3CP
INTERMATIC INCORPORATED | 1950 Innovation Way, Suite 300 | Libertyville, Illinois 60048 | www.intermatic.com 1

Intermatic ETW3CP Specifications

General

Voltage	120 VAC
Horsepower	1 HP
Programmable	Yes
Number of Programs	7
Display	LCD
Shortest ON/OFF Time	1 Minute
Contact Type	SPDT
Type	Electronic Timer
Mounting	Wall
Enclosure	Type 3R Plastic
Battery Backup	Yes, 3 Year Supercapacitor

Summary

Initial Setup: Creating an Intermatic Connect Account

Download and Open the Intermatic Connect App

Instructions to download the Intermatic Connect app from the Apple Store or Google Play.

Create Account and Verify Access Code

Steps to create an account, input credentials, and verify with a 6-digit access code.

Adding a Device

Select Device Type and Verify Communication

Choose the timer type, connect via Bluetooth, and verify with the 'Wink' button.

Connect to Wi-Fi and Cloud

Select Wi-Fi Network and Enter Password

Connect the device to your desired Wi-Fi network by selecting it and entering the password.

Advanced Scheduling Functions

ONOFF Schedules

Programming output states (NO/NC contacts) using basic or advanced relative/specific dates.

Device Operation and Modes

Full Unit Reset Button

Procedure to reset the unit to factory default settings using the reset button.

Modes and Overrides

Switching Modes

How to switch between Manual, Auto, and Service modes using the Mode button.

Manual Mode

Auto Mode

Service Mode

For technicians; enables local connection and overrides are disabled.

Overrides Definition

Manual action to toggle output state; concept applies primarily in Auto Mode.