Need help?Do you have a question about the Intermatic PE953 and is the answer not in the manual?
General| Brand | Intermatic |
|---|---|
| Category | Control Systems |
| Enclosure | Plastic |
| Poles | 1 |
| Amperage | 40 A |
| Horsepower | 2 hp |
| Number of Trippers | 2 |
| Frequency | 60 Hz |
| Number of Circuits | 1 |
| Input Voltage | 120-240 VAC |
| Timing Range | 24 hr |
| Load Current | 40A |
| Mounting | Surface |
Crucial safety instructions regarding electrical hazards and proper handling.
Introduces and lists the various system components like controllers, receivers, and sensors.
Step-by-step guide for installing the main control enclosure and receiver.
Instructions for installing the optional PE30000 load center.
Details on attaching the PE653 receiver unit to the load center.
Electrical specifications and contact ratings for system components.
Wiring diagrams and instructions for 120V power connections.
Wiring diagrams and instructions for 240V power connections.
Connecting single-speed pool pumps to the system.
Connecting two-speed pumps to the system.
Connecting variable speed pumps to the system.
Wiring a single heater to the PE653 controller.
Specific wiring guide for Jandy brand heaters.
Instructions for installing water and air temperature sensors.
To Next Page