How to fix Intermatic Control Systems controller not activating motorized valve in pool/spa?
If your Intermatic Control Systems controller isn't activating the motorized valve in a pool/spa combination system, it could be that the controller isn't configured for a pool/spa system. Set the controller to 'Both'. Also, incorrect water flow could be the issue, so adjust the motorized valve synchronization.
Why is my Intermatic MULTIWAVE PE653RC MultiWave controller not working?
Your Intermatic MultiWave controller might not be working because it is idle. To resolve this, press any button on the controller to take it out of idle mode. Alternatively, the batteries may need replacing, or fuse F1 on the receiver could be blown, in which case you should replace the fuse. Also, voltage may not be present at terminals 1 and 2 on the receiver because the voltage selector switch is not in the proper position. Verify the voltage with a voltmeter. Ensure the voltage selector switch on the receiver is in the correct position (120 or 240 VAC). Finally, check the wiring using the wiring diagrams in the Installation Guide.
What to do if Intermatic MULTIWAVE PE653RC controller is not communicating with the receiver?
If your Intermatic Control Systems controller isn't communicating with the receiver, it might be because they are not linked. You should perform the procedure to link the controller to the receiver.
How to improve Intermatic MULTIWAVE PE653RC controller communication with receiver on my property?
If your Intermatic Control Systems controller is not communicating with the receiver in certain areas, the antenna may need to be moved. Perform the procedure to remote the antenna.
What to do if there's water inside Intermatic MULTIWAVE PE653RC controller screen?
If you find water or moisture inside the Intermatic Control Systems controller screen, the controller needs to be dried out. Additionally, ensure the battery gasket is present and undamaged.
General| Brand | Intermatic |
|---|---|
| Model | MULTIWAVE PE653RC |
| Category | Control Systems |
| Language | English |
To Next Page
